Few random pics of the car ready to go get aligned and exhaust pipes.
The inside of the car is cleaned up more or less with just enough stuff to get to the shop with, Duct tape, rope, 4 coat hangers and a pair of vice grips. I have a few other tools just in case but those are my main tools. The car sits pretty level but the back might need raised up just a bit. I will level the car up once I get it at the shop on level concrete so it is easier to measure. The engine still is a bit messy but I have not had much time to do any real wiring on the car so nothing is working yet either 🙂
If you look at the last picture you can see the back tire is leaning slightly in at the top. The car needs aligned real bad since none of the other wheels look any better about sitting straight. No wonder it is such fun keeping it going in one direction on the road. I have put 12 miles on it so far and have not been able to hold it straight on the road but once it is back from the shop I hope to have all its steering and driving problems solved. Once that is done it is time to build a front firewall/radiator shroud and then put some serious miles on it before cold weather sets in.